Product Introduction
I. System Overview
The JTAF-10 Anti-Theft Water Security Alarm System uses advanced microprocessor technology as its control core. It features high integration, excellent reliability, and a variety of flexible interfaces. The product has a wide range of applications and is easy to use.
II. Application Range
Primarily used for agricultural irrigation equipment management and water intake facility management.
III. Function Description
★ When an unauthorized door opening triggers the system, an on‑site alarm sounds continuously.
★ When triggered, the system simultaneously captures an image of the protected zone and stores it as evidence.
★ The captured image is remotely uploaded to the management center, accompanied by an audible alarm notification.
★ The captured image is simultaneously and remotely synced to a pre‑configured mobile phone for convenient mobile management.
★ When an alarm is triggered, an instant SMS alert is sent to the designated security management mobile phone.
★ High‑speed digital communication with selectable dial‑up speed for signal transmission to the alarm center.
★ High‑definition digital female voice prompts with clear, good sound quality.
★ One master code and four standard user codes enable true password‑zoned arming/disarming.
★ Expandable GSM dual‑network dialing, expandable GPRS network center communication, and expandable IP network communication.
★ Free information upload via IP broadband; alarm data reaches the center in just 1–2 seconds.
★ Using a low‑cost data plan (e.g., CNY 5 for 30MB/month), GPRS upload costs only CNY 5 per month, with alarm information reaching the center in 1–2 seconds.
★ Modular stacked design for easy function upgrades and simple maintenance.
★ “Zero‑cost” mobile phone arming/disarming of the host.
★ “Zero‑cost” communication with the alarm center for arming/disarming.
★ Intelligent wired zone design eliminates false alarms at the source.
★ Built‑in perpetual calendar for accurate automatic arming.
★ Built‑in “black box” recorder that logs up to 40 alarm events.
★ Voice broadcast system for querying alarms, arming/disarming records, system faults, and host information – quick and convenient.
★ Built‑in voice module that can record 10–20 seconds of custom voice for voice alarm announcements.
★ Alarm voice broadcast – simple and clear.
★ Automatic recovery function: when power is restored after an outage, all settings and information from before the outage remain unchanged.
★ By setting up an alarm center, the host can be networked with a community surveillance center for integrated system operation.
★ The alarm center provides real‑time status of arming, disarming, alarm events, system faults, zone status, and event timestamps.
★ Remote control can be used for arming, disarming, and emergency alarm activation.
★ Photoelectric isolation circuit design provides superior lightning strike resistance.
★ Backup power port available; can sustain system operation for up to 24 hours during a power outage.
★ Watchdog timer prevents system lockup.
IV. Main Technical Specifications
V. Buzzer Sound Indications
During system operation, the buzzer emits different sounds to indicate different meanings.
